|
Here we go again! New
from the laser cutter is our own design lower control arm relocators.
these brackets allow the lowers to be adjusted on the rearend to the
stock hole, or 2 or 3 inches lower. this will put the arm i the stock
location if your car has been lowered, or will help the high horsepower
cars to transfer weight better. these will stop or reduce wheel hop,
which can cause driveline breakages. they are a weld on application for
the best strength. we stronly suggest the use of a adjustable style
lower control arm to reset alignment due to installation variables.
Comes with 4 brackets, bushing spacer, and grade 8 hardware. priced at
$69.95 for the set. |
